USB 3.0 Type-A
1x USB 3.0 Hub
1x HDMI, 1x VGA
1x Gigabit Ethernet
4 in 1
This little Multi-Docking station offers four further ports, 1x VGA, 1x HDMI, 1x USB 3.0, and Gigabit LAN. It's suitable for someone who uses most of these ports at the same time.
Small and fashionable
Because of its small size, it fits into your hands and in almost every pocket. Wherever you go this little companion with the integrated USB cable will always be by your side.
Sharing your memories
Do You want to take to your old projector and show your friends your photos? No problem! Share it with our IB-DK401 and enjoy your unforgettable memories together.
|Material||PC, ABS, Metal|
|USB 3.0 Speed||Up to 5 Gbit/s|
|HDMI®||Up to 2048 x 1152 Pixel|
|DVI||Up to 2048 x 1152 Pixel|
|Operating system||Windows 7 / 8, MAC OS > 10|
|Packing unit||40 pcs/carton|
|Total weight||8.5 kg/carton|
|Gross weight (incl. packing)||185 g|
|Net weight||65 g|
|Dimension of packing box||165x142x42 mm|
|Dimension of article||125x55x17 mm|
|Country of origin||China|
What is DisplayLink?
Compatibility with host computers?
How many monitors can I connect?
Is the DockingStation ready for gaming?
Is Windows® 10 supported?
Can I use the DockingStation with Mac?
ATTENTION: Apple devices with the operating system macOS® 10.13.4 are not supported! As of macOS® 10.13.5 and higher, the operation of the DockingStation is again possible without limitations!
Is the notebook charged through the DockingStation?
How hard is the setup?
How can I continue working with my closed notebook?
• You can make these settings in the power options.
• Select Settings – System - Power & sleep.
• Select "Additional power settings".
• Go to “Choose what closing the lid does".
• Select "Do nothing”.
To keep the Mac® from shutting down when it's closed, the following actions are necessary:
• The MacBook® must be connected to the power supply.
• A mouse and keyboard must be connected.
• A monitor must be connected. In this case, the MacBook® can also be used when closed.
What is the maximum number of external monitors supported by DisplayLink software?
The included USB cable is too short, can I use a third-party cable?
Does the DockingStation prevent the use of video connections on the notebook directly?
Does the DockingStation support audio output via HDMI or DisplayPort™?
No network connection via the DockingStation, but via the host computer. What is the problem?
After the Windows operating system is updated, the DockingStation does not work anymore.
• Disconnect the DockingStation from the host computer.
• Download and run DisplayLink Installation Cleaner.
• Download and install the latest DisplayLink drivers.
• Restart the notebook/PC.
• Reconnect the DockingStation.
The displayed image from the DockingStation is jittering or flickering.
• If the problem persists, try using a high quality cable.
The monitor does not turn on again after the notebook wakes from sleep mode.
• Windows® may have automatically turned off the USB root hub to save power. To prevent this from happening, follow these simple steps to change the USB root hub settings in order to stay active during sleep mode.
Windows 8/8.1 and 10
• Go to the Windows® settings and select "System" - "Power & sleep". Then select "Additional power settings".
• Click the power plan settings you want to use.
• Click "Change plan settings"
• Click "Change advanced power settings".
• Click the plus symbol (+) next to "USB settings" and " USB selective suspend setting"
• Setting" to expand the options and change the setting to "Disabled”. Click OK to accept the changes.
Hint: You may need to disconnect and reconnect your DockingStation after applying these settings to restore the connection.
The video output does not work even after installing the latest DisplayLink driver.
Why does my wireless mouse or keyboard look sluggish or not work properly when used with the DockingStation?
How do I know the MAC address of the DockingStation?
- Connect the DockingStation to the running Windows® computer and connect the LAN cable, switch the DockingStation on if necessary.
- Right-click on the Windows® icon in the lower-left corner.
- Select the "Run" field.
- Enter cmd and confirm by pressing OK/ENTER.
- Write ipconfig/all and confirm by pressing the ENTER key.
- The connected network devices with MAC addresses are now displayed.
- Connect the DockingStation to the running MacOS® computer and connect the LAN cable, switch on the DockingStation if necessary.
- Click on System Report.
- Click on Network.
- Select the appropriate device. The MAC address is displayed below.