4-port card reader for 3.5" bay
with Type-C® and Type-A hub
Multi card reader for one standard 3.5" bay
Multi card reader for all common memory card formats such as microSD, SD, CF and MS
1x USB Type-C® and 1x USB Type-A inerface
Power and access
On the front side
Turn your PC case into a multi-talent. With card readers and USB ports, all important connections are within reach and expand your possibilities without external devices minimising desk space.
Type-C® with USB 3.1 (Gen 2)
Data transfers too slow? Double the speed and save valuable time. With the USB 3.1 (Gen 2) Type-C® port in the front panel, data can now be transferred at up to 10 Gbit/s. Waiting was yesterday!
Card readers for all
Don‘t worry about whether the memory card from the smartphone or camera can also be read on the computer. The IB-865a reads all common memory card formats such as microSD, SD, CF and MS. Thanks to Multi-LUN, memory cards can even be read simultaneously.
|Space required||1x 3.5" bay|
|Interface to host computer||USB 3.2 (Gen 1) 19 pin, USB 3.2 (Gen 2) header|
|Length of internal cable||USB 3.2 (Gen 1) 19 pin = 60 cm, USB 3.2 (Gen 2) header = 50 cm|
|Card slots||1x MicroSD 3.0 (UHS-I), 1x SD 3.0 (UHS-I), 1x CF up to UDMA166, 1x MS PRO|
|Interfaces||USB 3.2 (Gen 2) Type-C® - up to 10 Gbit/s, USB 3.2 (Gen 1) Type-A - up to 5 Gbit/s|
|LED||Power and access|
|System requirements||USB 3.2 (Gen 1) 19 pin, USB 3.2 (Gen 2) header|
|Packing content||1x IB-865a, 4x screws, 1x manual|
|Packing unit:||20 pcs. / carton|
|Total weight:||7.4 kg|
|Gross weight: (with packing):||0.343 kg|
|Net weight:||0.268 kg|
|Dimension (with packing):||30x143x200 mm|
|Dimension of article:||120x110x25 mm|
Are special drivers required?
Is Plug & Play supported?
What is the cable length?
Which memory cards are supported?
What is Multi-LUN?
The hub/card reader is without function after sleep mode!
Windows 8/8.1 and 10
• Go to the Windows® settings and select "System" - "Network operation and energy saving". Then select the "additional power settings".
• Click the power plan settings you want to change.
• Click "Change advanced power settings.
• Click the plus sign (+) next to "USB Settings" and ""Selective USB Power Saving Setting" to expand the options and change the setting to "Disabled".
• Click OK to apply the setting.
Note: After applying these settings, you may need to disconnect and reconnect your USB device to reconnect.