Mobile rack for 3x HDD/SSD
for 1x 5.25" bay
Mounting frame for 1x 5.25" bay
For 2x 2.5" HDD/SSD and 1x 3.5" HDD
Toolless fixing of the 2x 2.5" HDD/SSD
Anti vibration frames for all HDDs/SSDs
Wolf in sheep's clothing?
... Or vice versa? In any case this chic 2.5" to 3.5" HDD Converter looks like a 3.5" HDD with a fast 2,5" SSD inside. The converter can then be installed easily in a 3.5" bay.
All heights compatibile
Other than (for example) the internal 2.5" housing of your pc, this mobile rack can hold two 2.5" HDDs/SSDs with a height of 7 - 9.5 mm and one standard 3.5" HDD.
No tools required
The HDD/SSD can be installed or replaced quickly without tools. It needs no screws or screw driver to remove the disk, since the disk is straplessly accommodated in the enclosure.
|HDD interface||2x 2.5" + 1x 3.5" SATA|
|HDD height||2.5" HDD/SSD 7 - 9.5 mm|
|Operating system||Operating system independent|
|Packing unit||40 pcs./carton|
|Total weight||9.7 kg/carton|
|Gross weight (incl. packing)||0.195 kg|
|Net weight||0.112 kg|
|Dimension of packing box||200x155x45 mm|
|Dimension of article||175x147x40 mm|
|Country of origin||China|
Compatibility with the host computer
Are cables included in the package content?
If you want to connect a USB Type-C® enclosure to a USB Type-A connector, it is possible to use an adapter from ICY BOX (IB-CB015). The same works in the other direction from USB Type-A to USB Type-C® (IB-CB003).
Up to which hard disk capacity can I equip the ICY BOX?
Can a HDD be removed from an external HDD and installed into an ICY BOX?
Are special drivers required?
Can the enclosure also be connected to USB 2.0 ports?
Do I need a power supply for my external 2.5" enclosure?
Why is the HDD/SSD not recognized?
If the HDD/SSD is new, it must first be correctly formatted and partitioned before it is displayed in the system.
Use a different USB port on your notebook or PC.
Check if the power supply is connected and the external enclosure is switched on with the on/off switch (only for 3.5" enclosures).
Update the USB 3.0 / USB 3.1 drivers of your notebook/PC or mainboard. Current USB drivers can be found on the website of your mainboard manufacturer.
Everything is connected, but no function.
To test your components, proceed as follows:
- Use the cables, hard drives, and enclosures on another system to see if your system is the source of the problem.
- Use a different cable, HDD/SSD, and hard disk enclosure one after the other to see if the problem persists. Ideally, you should test a component that you know works in a different setup.