Backplane for 8x HDD/SSD
for 2x 5.25" bay with lock and fan
Backplane for 2x 5.25" bay
For 8x 2.5" HDDs or SSDs
Keylock prevents accidental and unauthorized access
1x 70mm fan
Now for the little ones
The IB-2280SSK is the big brother of the IB-2240SSK, now there is a solution for 2.5" HDDs and SSDs in 2x 5.25" bay. It can hold 8 HDDs/SSDs with a maximum height of 15 mm.
An elaborated system
To prevent overheating of the HDDs and SSDs at full duty, the aluminium case provides a good heat dissipation and is a perfect match wit the70-mm Fan.
... is assure by SATA III and a SAS chipset. Due to Sata Power no extra powerline is needed for the Backplane. The status led can be switched off. If the HDDs fail or overheat there is an visual alarm signal.
|Fan||1x 70mm fan|
|HDD size (inch)||2,5"|
|HDD size (cm)||6,35 cm|
|HDD height||6 - 15 mm|
|Plug & Play||Yes|
|HDD interface||8x 2.5" SAS/SATA I/II/II|
|Host interface||8x SATA I/II/III|
|Transfer rate||Up to 6 Gbit/s|
|Operating system||OS independent|
|LED||Power, HDD Access, Fan status, Temperature|
|Power connector||2x 15pin SATA power|
|Alarm||visual overheating and fan failure|
|Packing unit||8 pcs./carton|
|Total weight||10.9 kg/carton|
|Gross weight (incl. packing)||1.250 kg|
|Net weight||1.075 kg|
|Dimension of packing box||250x175x120 mm|
|Dimension of article||145x160x85 mm|
|Country of origin||China|
Compatibility with the host computer
Are cables included in the package content?
If you want to connect a USB Type-C® enclosure to a USB Type-A connector, it is possible to use an adapter from ICY BOX (IB-CB015). The same works in the other direction from USB Type-A to USB Type-C® (IB-CB003).
Up to which hard disk capacity can I equip the ICY BOX?
Can a HDD be removed from an external HDD and installed into an ICY BOX?
Are special drivers required?
Can the enclosure also be connected to USB 2.0 ports?
Do I need a power supply for my external 2.5" enclosure?
Why is the HDD/SSD not recognized?
If the HDD/SSD is new, it must first be correctly formatted and partitioned before it is displayed in the system.
Use a different USB port on your notebook or PC.
Check if the power supply is connected and the external enclosure is switched on with the on/off switch (only for 3.5" enclosures).
Update the USB 3.0 / USB 3.1 drivers of your notebook/PC or mainboard. Current USB drivers can be found on the website of your mainboard manufacturer.
Everything is connected, but no function.
To test your components, proceed as follows:
- Use the cables, hard drives, and enclosures on another system to see if your system is the source of the problem.
- Use a different cable, HDD/SSD, and hard disk enclosure one after the other to see if the problem persists. Ideally, you should test a component that you know works in a different setup.