Mobile rack for 1x HDD/SSD
for 1x 3.5" bay with lock
Form factor 3.5"
Aluminium and metal
Plug & Play and Hot Swap
Green light for the server
Made of sturdy steel and high-grade aluminum, this matt black mobile rack is particularly suitable for use in industrial environments. It can accommodate SATA III or SAS hard drives and it is lockable.
To keep a cool head
Due to the quality of the metal this mobile rack is resistant against vibrations and other external influences, but also conducts waste heat thoroughly. Without an additional fan he remains silent. The mobile rack is integrated via SATA power and data connection to the server.
What's your status?
There are several LEDs so you can see the status of your HDDs at any time. The green circular LED indicates that the mobile rack is connected to the power. Another LED below the drive tray glows blue and signals that the hard drive is connected, and flashes red when accessing.
|Material||Aluminium + Metal|
|HDD interface||SAS II / SATA III|
|HDD height||6 - 15 mm|
|Plug & Play||Yes|
|Operating system||Operating system independent|
|Power connector||15-pin SATA power cable (not included)|
|Dimension of packing box||195x145x45 mm|
|Dimension of article||100x25x140 mm|
|Country of origin||China|
|Packing unit||20 pcs./carton|
|Total weight||12.3 kg/carton|
|Gross weight (incl. packing)||0.570 kg|
|Net weight||0.433 kg|
Compatibility with the host computer
Are cables included in the package content?
If you want to connect a USB Type-C® enclosure to a USB Type-A connector, it is possible to use an adapter from ICY BOX (IB-CB015). The same works in the other direction from USB Type-A to USB Type-C® (IB-CB003).
Up to which hard disk capacity can I equip the ICY BOX?
Can a HDD be removed from an external HDD and installed into an ICY BOX?
Are special drivers required?
Can the enclosure also be connected to USB 2.0 ports?
Do I need a power supply for my external 2.5" enclosure?
Why is the HDD/SSD not recognized?
If the HDD/SSD is new, it must first be correctly formatted and partitioned before it is displayed in the system.
Use a different USB port on your notebook or PC.
Check if the power supply is connected and the external enclosure is switched on with the on/off switch (only for 3.5" enclosures).
Update the USB 3.0 / USB 3.1 drivers of your notebook/PC or mainboard. Current USB drivers can be found on the website of your mainboard manufacturer.
Everything is connected, but no function.
To test your components, proceed as follows:
- Use the cables, hard drives, and enclosures on another system to see if your system is the source of the problem.
- Use a different cable, HDD/SSD, and hard disk enclosure one after the other to see if the problem persists. Ideally, you should test a component that you know works in a different setup.