Mobile rack for 1x HDD
for 1x 5.25" bay with lock
Trayless mobile rack for 1x 5.25" bay
Supports all 3.5" SATA HDDs
Key lock to prevent improper operation
No tools or screw are needed in order to install an HDD in this trayless mobile rack. Once built in a 5.25” bay, simply open the front panel, insert the HDD and close the panel again. Done.
The lock provide a security against theft by unauthorized persons and both LED rings doesn’t only look stylish, but are also providing interesting information to the user concerning HDD activity and more.
The patented NSS (Non-Scratch-SATA) connector is built to withstand 50000 HDD replacements, Which means about 50 years if we calculate four to five changes per day. This special aluminium enclosure is concepted without fan and the built-in rubber padding protects and vibrations and noise.
The patented NSS (Non-Scratch-SATA) connection is designed for over 50,000 hard disk changes. With four to five changes per day, this corresponds to a service life of around 50 working years. The special aluminum housing does not need a fan and the built-in rubber padding prevents the data carrier from vibrating and noises.
|HDD size (inch)||3.5"|
|HDD interface||1x 3.5 SAS/SATA III|
|HDD capacity||No limit|
|Plug & Play||Yes|
|External data interface||1x SATA III|
|Operating system||Operating system independent|
|Power connector||15Pin SATA power|
|Packing unit||20 pcs./carton|
|Total weight||9.6 kg/carton|
|Gross weight (incl. packing)||0.435 kg|
|Net weight||0.301 kg|
|Dimension of packing box||227x155x50 mm|
|Dimension of article||185x147x41 mm|
|Country of origin||China|
Compatibility with the host computer
Are cables included in the package content?
If you want to connect a USB Type-C® enclosure to a USB Type-A connector, it is possible to use an adapter from ICY BOX (IB-CB015). The same works in the other direction from USB Type-A to USB Type-C® (IB-CB003).
Up to which hard disk capacity can I equip the ICY BOX?
Can a HDD be removed from an external HDD and installed into an ICY BOX?
Are special drivers required?
Can the enclosure also be connected to USB 2.0 ports?
Do I need a power supply for my external 2.5" enclosure?
Why is the HDD/SSD not recognized?
If the HDD/SSD is new, it must first be correctly formatted and partitioned before it is displayed in the system.
Use a different USB port on your notebook or PC.
Check if the power supply is connected and the external enclosure is switched on with the on/off switch (only for 3.5" enclosures).
Update the USB 3.0 / USB 3.1 drivers of your notebook/PC or mainboard. Current USB drivers can be found on the website of your mainboard manufacturer.
Everything is connected, but no function.
To test your components, proceed as follows:
- Use the cables, hard drives, and enclosures on another system to see if your system is the source of the problem.
- Use a different cable, HDD/SSD, and hard disk enclosure one after the other to see if the problem persists. Ideally, you should test a component that you know works in a different setup.