Backplane
Mobile rack for 1x 5.25" bay
HDD
For 1x 3.5" or 2.5" SATA HDD
Security
Key lock
HotSwap
Hot Swap
LED
LED power and HDD access

No tray = double the speed
The fact that the HDD does not need to be screwed to a tray makes the HDD installation much faster. A 5.25" bay is needed on the PC. SATA HDDs are supported SATA I/II/III.
No fan = whisper silent
This mobile rack is made almost completely from aluminium, only the front and back panels are made of hard plastic. Aluminium is very stable, very light and on top of everything else, it dissipate heat perfectly. That is why no fan is needed in order to protect the HDDs. In case still wished, a 12V fan can be installed (not delivered in the package).
No worries = locked
In order that the HDD will stay protected at all times, a lock was added. In this way, no unauthorized person will be able to reach your data. An LED indicator provides information regarding HDD access and activity.

TECHNICAL SPECIFICATIONS
Technical Data
Model | IB-129SSK-B |
---|---|
Article No | 20048 |
EAN Code | 4250078188438 |
Brand | ICY BOX |
Category | mobile racks |
Material | Aluminium |
Colour | Black |
HDD size (inch) | 3.5"/2.5" |
HDD interface | 1x SATA 1.5/3.0/6.0 Gbit/s |
HDD height | Up to 25.4 mm (1'') |
HDD capacity | Unlimited |
HotSwap | Yes |
Plug & Play | Yes |
External data interface | 1x SATA power connection 15Pin, 1x SATA data connection 7Pin |
Operating system | Operating system independent |
Power connection | 1x 15Pin SATA power |
Logistical Data
Packing unit | 20 pcs./carton |
---|---|
Total weight | 11,26 kg/Karton |
Gross weight (incl. packing) | 0.525 kg |
Net weight | 0.422 kg |
Dimension/carton | 420x330x262 mm |
Dimension of packing box | 46x197x154 mm |
Dimension of article | 186x146x41 mm |
Country of origin | China |
DOCUMENTS
Data sheet
DOWNLOADFAQ
Compatibility with the host computer
Are cables included in the package content?
If you want to connect a USB Type-C® enclosure to a USB Type-A connector, it is possible to use an adapter from ICY BOX (IB-CB015). The same works in the other direction from USB Type-A to USB Type-C® (IB-CB003).
Up to which hard disk capacity can I equip the ICY BOX?
Can a HDD be removed from an external HDD and installed into an ICY BOX?
Are special drivers required?
Can the enclosure also be connected to USB 2.0 ports?
Do I need a power supply for my external 2.5" enclosure?
Why is the HDD/SSD not recognized?
If the HDD/SSD is new, it must first be correctly formatted and partitioned before it is displayed in the system.
Use a different USB port on your notebook or PC.
Check if the power supply is connected and the external enclosure is switched on with the on/off switch (only for 3.5" enclosures).
Update the USB 3.0 / USB 3.1 drivers of your notebook/PC or mainboard. Current USB drivers can be found on the website of your mainboard manufacturer.
Everything is connected, but no function.
- Cables
- HDD/SSD
- Enclosure
To test your components, proceed as follows:
- Use the cables, hard drives, and enclosures on another system to see if your system is the source of the problem.
- Use a different cable, HDD/SSD, and hard disk enclosure one after the other to see if the problem persists. Ideally, you should test a component that you know works in a different setup.