Enclosure for 1x HDD/SSD
with USB 3.0 Type-A interface and silicone sleeve
External enclosure for 2.5" HDDs/SSDs incl. silicone protection sleeve
1x USB 3.0 up to 5 Gbit/s with UASP support
Toolless HDD installation
Plug & Play and Hot Swap
LED Power for HDD access
Show me your diamonds
The noble carbon optics makes a real head turner, so the data-catcher is an eye-catcher. With an unobtrusive appearance, the enclosure integrates perfectly into their workspace.
Silicone protection ring
The slender silicone frame makes for a for a great stability and it dampens impact damage and thus protects the hard drive in addition.
Using the SATA III, USB 3.0 and UASP support the data is transferred faster from A to B than ever before. The USB 3.0 port can come up with up to 5 Gbit/s and UASP gives it some additional speed points, well done.
|HDD size (Zoll)||2,5"|
|HDD size (cm)||6,35 cm|
|Hard disk connector||1x 2,5" SATA I/II/III|
|HDD height||Up to 9.5 mm|
|HDD capacity||No limit|
|Plug & Play||Yes|
|Transfer rate||USB 3.0 up to 5 Gbit/s|
|External data interface||1x USB 3.0 with UASP support|
|Operating system||Supports Windows & Mac|
|Power connector||Power via USB|
|Packing unit||20 pcs./carton|
|Total weight||4.6 kg/carton|
|Gross weight (incl. packing)||0.200 kg|
|Net weight||0,054 kg|
|Dimension of packing box||200x100x35 mm|
|Dimension of article||130x80x14 mm|
|Country of origin||China|
Compatibility with the host computer
Are cables included in the package content?
If you want to connect a USB Type-C® enclosure to a USB Type-A connector, it is possible to use an adapter from ICY BOX (IB-CB015). The same works in the other direction from USB Type-A to USB Type-C® (IB-CB003).
Up to which hard disk capacity can I equip the ICY BOX?
Can a HDD be removed from an external HDD and installed into an ICY BOX?
Are special drivers required?
Can the enclosure also be connected to USB 2.0 ports?
Do I need a power supply for my external 2.5" enclosure?
Why is the HDD/SSD not recognized?
If the HDD/SSD is new, it must first be correctly formatted and partitioned before it is displayed in the system.
Use a different USB port on your notebook or PC.
Check if the power supply is connected and the external enclosure is switched on with the on/off switch (only for 3.5" enclosures).
Update the USB 3.0 / USB 3.1 drivers of your notebook/PC or mainboard. Current USB drivers can be found on the website of your mainboard manufacturer.
Everything is connected, but no function.
To test your components, proceed as follows:
- Use the cables, hard drives, and enclosures on another system to see if your system is the source of the problem.
- Use a different cable, HDD/SSD, and hard disk enclosure one after the other to see if the problem persists. Ideally, you should test a component that you know works in a different setup.