3-port hub for 3.5" drive bay
with card reader and USB 3.0 20 pin interface
Fits a standard 3.5" (8.89 cm) bay
1 x USB Type-C® with a transfer rate of up to 5 Gbit/s
2x USB Type-A with a transfer rate of up to 5 Gbit/s
SD and microSD dual card reader (UHS-I)
With the IB-HUB1417-i3, devices become a small control center again. Existing devices such as printers, USB sticks with Type-A and Type-C™ ports, keyboards and SD/MicroSD can now be used again in an uncomplicated manner, without the need to search for a free connection or reorder connected devices.
we won´t miss thanks to Multi-LUN support, each logical drive is a stand-alone device. This allows both SD cards to be accessed and data copied simultaneously. This makes the usual back and forth of SD cards a thing of the past.
Not only useful but handsome
Devices that we use every day should not only work but also appeal to us visually. The IB-HUB1417-i3 with its simple inscription on the black paint of the solid metal housing would particularly like to please us here - and is very successful.
|Material||Metal, 1 mm thick|
|SD card capacity||2 TB|
|Transfer rate||Up to 5 Gbit/s|
|Power connector||SATA power connector|
|Chipset||GL3520 + ASM1543 + GL3224|
|Plug & Play||Yes|
|Input||USB 3.0 20 pin|
|Output||1x USB 3.0 Type-C®, 2x USB 3.0 Type-A, 1x microSDHC, 1x SDHC|
|Output maximal||5 V, 900 mA|
|Memory card support||1x microSDHC, 1x SDHC|
|Packing unit||40 pcs./carton|
|Total weight||11.6 kg/carton|
|Gross weight (incl. packing)||0.273 kg|
|Net weight||0.151 kg|
|Dimension of packing box||31x151x151 mm|
|Dimension of article||137x101x25 mm|
|Country of origin||China|
Are special drivers required?
Is Plug & Play supported?
What is the cable length?
Which memory cards are supported?
What is Multi-LUN?
The hub/card reader is without function after sleep mode!
Windows 8/8.1 and 10
• Go to the Windows® settings and select "System" - "Network operation and energy-saving". Then select the "additional power settings".
• Click the power plan settings you want to change.
• Click "Change advanced power settings.
• Click the plus sign (+) next to "USB settings" and "Selective USB Power Saving Setting" to expand the options and change the setting to "Disabled".
• Click OK to apply the setting.
Note: After applying these settings, you may need to disconnect and reconnect your USB device to reconnect.