Backplane for 4x HDD/SSD
for 1x 5,25" bay with lock and two fans
Backplane for 1x 5.25" bay
For 4x 2.5" HDDs or SSDs
Twox 40mm fans
LED for power and access
Keylock prevents accidental and unauthorized access
An elaborated system
In order to prevent the hard HDDs from getting too warm during operation, the aluminium housing ensures a certain stability as well as good heat dissipation. The 2x 40x40 mm fans cool down the backplane perfectly.
For small devices
A backplane solution for the smaller 2.5" HDDs. Up to four HDDs with a maximum height of 15 mm can be accommodated here.
Fast & Safe
The Back Plane supports SAS and SATA HDDs and therefore high transfer rates. The existing locks protect the HDDs from unauthorized access.
|Fan||2x 40x40 mm|
|HDD size (inch)||2,5"|
|HDD height||Up to 15 mm|
|HDD interface||4x 2.5" SATA/SAS HDD/SSD|
|Host interface||4x SATA Data Connector 7Pin with security clips|
|Transfer rate||SATA III up to 6 Gbit/s, SAS III up to 12 Gbit/s|
|Operating system||OS independent|
|Power connector||SATA Power 15 Pin|
|Packing unit||8 pcs./carton|
|Total weight||9,1 kg/carton|
|Gross weight (incl. packing)||1,017 kg|
|Net weight||0,752 kg|
|Dimension of packing box||205x80x195 mm|
|Dimension of article||145x150x41 mm|
|Country of origin||China|
Compatibility with the host computer
Are cables included in the package content?
If you want to connect a USB Type-C® enclosure to a USB Type-A connector, it is possible to use an adapter from ICY BOX (IB-CB015). The same works in the other direction from USB Type-A to USB Type-C® (IB-CB003).
Up to which hard disk capacity can I equip the ICY BOX?
Can a HDD be removed from an external HDD and installed into an ICY BOX?
Are special drivers required?
Can the enclosure also be connected to USB 2.0 ports?
Do I need a power supply for my external 2.5" enclosure?
Why is the HDD/SSD not recognized?
If the HDD/SSD is new, it must first be correctly formatted and partitioned before it is displayed in the system.
Use a different USB port on your notebook or PC.
Check if the power supply is connected and the external enclosure is switched on with the on/off switch (only for 3.5" enclosures).
Update the USB 3.0 / USB 3.1 drivers of your notebook/PC or mainboard. Current USB drivers can be found on the website of your mainboard manufacturer.
Everything is connected, but no function.
To test your components, proceed as follows:
- Use the cables, hard drives, and enclosures on another system to see if your system is the source of the problem.
- Use a different cable, HDD/SSD, and hard disk enclosure one after the other to see if the problem persists. Ideally, you should test a component that you know works in a different setup.