CloneStation for 2x HDD/SSD
with integrated USB 3.0 Type-A interface
Docking and CloneStation for 2.5" SATA HDD/SSD
USB 3.0 host interface with up to 5 Gbit/s and UASP
Bootable SSD/HDD cloning without PC (stand-alone)
Plug & Play and HotSwap
LED indicator for power and HDD activity
The IB-2502CL-U3 offers space for two 2.5" hard drives or SSDs and holds them in place with a spring mechanism for maximum stability. You can write or read them at the same time which can save a significant amount of time. The hard disk capacity is unlimited.
Six colored LEDs inform the user about the status of the cloning operation, and the hard drives at any time. If nothing is being cloned, the USB 3.0 Standard can reach transfer rates of up to 5 Gbit/s. The hard drives are detected and displayed independently.
This function is maintained when the docking station is separated from the PC. The disks are then cloned without a PC connection. The power cord should still remain connected though.
|TransferRate||Up to 15 mm|
|HDD connection||2x 2,5" SATA|
|Transfer rate||Up to 5 Gbit/s|
|Plug & Play||Yes|
|External interface||1x USB 3.0, integrated cable: USB Type-A (host PC). Backward compatible with USB 2.0|
|Operating system||Windows®, macOS®|
|On / off switch||Yes|
|Power connector||Power AC 100-240 V, 50/60 Hz to DC 5 V / 2 A|
|Packing unit||40 pcs./carton|
|Total weight||14.0 kg/carton|
|Gross weight (incl. packing)||0,325 kg|
|Net weight||0,150 kg|
|Dimension of packing box||200x105x45 mm|
|Dimension of article||93x87x43 mm|
|Country of origin||China|
Compatibility with the host computer
Are cables included in the package content?
If you want to connect a USB Type-C® enclosure to a USB Type-A connector, it is possible to use an adapter from ICY BOX (IB-CB015). The same works in the other direction from USB Type-A to USB Type-C® (IB-CB003).
Up to which hard disk capacity can I equip the ICY BOX?
Can a HDD be removed from an external HDD and installed into an ICY BOX?
Are special drivers required?
Can the enclosure also be connected to USB 2.0 ports?
Do I need a power supply for my external 2.5" enclosure?
Why is the HDD/SSD not recognized?
If the HDD/SSD is new, it must first be correctly formatted and partitioned before it is displayed in the system.
Use a different USB port on your notebook or PC.
Check if the power supply is connected and the external enclosure is switched on with the on/off switch (only for 3.5" enclosures).
Update the USB 3.0 / USB 3.1 drivers of your notebook/PC or mainboard. Current USB drivers can be found on the website of your mainboard manufacturer.
Everything is connected, but no function.
To test your components, proceed as follows:
- Use the cables, hard drives, and enclosures on another system to see if your system is the source of the problem.
- Use a different cable, HDD/SSD, and hard disk enclosure one after the other to see if the problem persists. Ideally, you should test a component that you know works in a different setup.