Enclosure for 1x HDD/SSD
with USB 3.1 (Gen 2) Type-C® interface and LED ring
Enclosure for 3.5" SATA III HDD
USB 3.1 Type-C™ - up to 10 Gbit/s
Plug & Play and HotSwap
Power, HDD Access
The IB-377-C31 consists of a striking yet simple blend of highly polished aluminum and sandblasted plastic. Thus it is good looking but also very light and easy to handle.
Always at the ready
Thanks to Plug & Play and HotSwap you can connect the enclosure and you are just one click away from your files. To be sure, one glance at the blue lightning LED is enough to assure the IB-377-C31 is ready for usage.
USB 3.1 (Gen 2) with Type-C™
With the technology of USB 3.1, even higher data transfer rates are now achieved. Also, USB 3.1 is downwards compatible, with the corresponding cables or adapters. The data rate of up to 10 Gbit/s is supported by the included USB 3.1 Type-C™ cable and only needs a suitable end device in the form of a PC, tablet, or the like.
|HDD interface||1x 3.5" SATA I, II, III|
|Plug & Play||Yes|
|Transfer rate||Up to 10 Gbit/s|
|External data interface||USB 3.1 Type-C™|
|Operating system||Windows®, Linux®, macOS®|
|Power connector||External Power Supply: AC: 100-240 V / 24 W; DC: 12 V / 2 A|
|Packing unit||20 pcs./carton|
|Total weight||14.0 kg/carton|
|Gross weight (incl. packing)||0,645 kg|
|Net weight||0,270 kg|
|Dimension of packing box||130x90x230 mm|
|Dimension of article||203x30x115 mm|
|Country of origin||China|
Compatibility with the host computer
Are cables included in the package content?
If you want to connect a USB Type-C® enclosure to a USB Type-A connector, it is possible to use an adapter from ICY BOX (IB-CB015). The same works in the other direction from USB Type-A to USB Type-C® (IB-CB003).
Up to which hard disk capacity can I equip the ICY BOX?
Can a HDD be removed from an external HDD and installed into an ICY BOX?
Are special drivers required?
Can the enclosure also be connected to USB 2.0 ports?
Do I need a power supply for my external 2.5" enclosure?
Why is the HDD/SSD not recognized?
If the HDD/SSD is new, it must first be correctly formatted and partitioned before it is displayed in the system.
Use a different USB port on your notebook or PC.
Check if the power supply is connected and the external enclosure is switched on with the on/off switch (only for 3.5" enclosures).
Update the USB 3.0 / USB 3.1 drivers of your notebook/PC or mainboard. Current USB drivers can be found on the website of your mainboard manufacturer.
Everything is connected, but no function.
To test your components, proceed as follows:
- Use the cables, hard drives, and enclosures on another system to see if your system is the source of the problem.
- Use a different cable, HDD/SSD, and hard disk enclosure one after the other to see if the problem persists. Ideally, you should test a component that you know works in a different setup.