Enclosure for 1x HDD/SSD
with integrated USB 3.1 (Gen 2)
Enclosure for one 2,5" HDD/SSD - up to 9.5 mm height
Integrated USB 3.0 Type-C™ Cable- up to 5 Gbit/s
LED for power and HDD access
High-grade aluminum enclosure
Fast pit stop
Cover up - remove the drive, insert new drive, cover down - done. The toolless mounting makes HDDs and SSDs quick and easy to install and easy to replace.
Are we there yet?
The copying of a large amount of data is pending and nobody wants to devote their undivided attention to the copying process. The integrated LED shows us in stylish blue whether hard disk access and therefore the copying process is still taking place - so that you can concentrate on the important things.
Thanks to a thoughtful design the integrated USB 3.0 Type-C™ cable can be stored in the enclosure, making the usage of an external cable totally unnecessary. In addition, the enclosure needs only a little space.
|HDD interface||1x 2.5" SATA III|
|HDD height||Up to 9.5"|
|Plug & Play||Yes|
|Transfer rate||Up to 5 Gbit/s|
|External data interface||USB 3.0 Type-C™|
|Operating system||Windows, macOS, Linux|
|Packing unit||40 pcs./carton|
|Total weight||7.0 kg/carton|
|Gross weight (incl. packing)||0,160 kg|
|Net weight||0,088 kg|
|Dimension of packing box||100x25x200 mm|
|Dimension of article||133x14x78 mm|
|Country of origin||China|
Compatibility with the host computer
Are cables included in the package content?
If you want to connect a USB Type-C® enclosure to a USB Type-A connector, it is possible to use an adapter from ICY BOX (IB-CB015). The same works in the other direction from USB Type-A to USB Type-C® (IB-CB003).
Up to which hard disk capacity can I equip the ICY BOX?
Can a HDD be removed from an external HDD and installed into an ICY BOX?
Are special drivers required?
Can the enclosure also be connected to USB 2.0 ports?
Do I need a power supply for my external 2.5" enclosure?
Why is the HDD/SSD not recognized?
If the HDD/SSD is new, it must first be correctly formatted and partitioned before it is displayed in the system.
Use a different USB port on your notebook or PC.
Check if the power supply is connected and the external enclosure is switched on with the on/off switch (only for 3.5" enclosures).
Update the USB 3.0 / USB 3.1 drivers of your notebook/PC or mainboard. Current USB drivers can be found on the website of your mainboard manufacturer.
Everything is connected, but no function.
To test your components, proceed as follows:
- Use the cables, hard drives, and enclosures on another system to see if your system is the source of the problem.
- Use a different cable, HDD/SSD, and hard disk enclosure one after the other to see if the problem persists. Ideally, you should test a component that you know works in a different setup.