3-port desk hub

3-port desk hub
with SD/microSD card reader, USB Type-A interface and charging current indication

IB-HUB1404

PRACTICAL TABLE EXTENSION: An ICY BOX table extension perfect for a cable feed-through of 60 mm with 2x USB 3.0 Type-A and 1x USB 3.0 Type-C, audio in and out and SD/microSD card reader
FAST SPEED: All three USB ports have USB 3.0 bandwidth and can achieve transfer rates of up to 5 Gbps. USB Type-C is especially handy for the latest computer peripherals
SD CARD READER: You also get an SD & MicroSD card reader (SD, SDHC, SDXC). Furthermore, the LED display shows the current charging strength in amps (left USB Type-A port)
DUST PROTECTION: The desk lift can be installed in existing cable grommets (60 mm diameter) in the desk. Furthermore, a cover is supplied which can be used to protect the ports
COMPUTER CONNECTION: An integrated 120 cm USB 3.0 and audio cable can be connected directly to the PC and it is possible to connect a 5V power supply (not included) for charging devices

Ask Questions

USB

2x USB 3.0 Type-A, 1x USB 3.0 Type-C® - up to 5 Gbit/s

Cardreader

SD/microSD card reader

LED

LED display shows charging current of USB port 1 in Ampere

HotSwap

Plug & Play and HotSwap

Makes the computer more sociable

The IB-Hub1404 offers two USB 3.0 ports to connect a variety of devices. The SD / MicroSD card reader completes the versatility and a USB Type-C™ connection is available so the latest peripherals can be connected.

Fast reading, fast loading

All USB ports support the charging specification BC 1.2 and USB 3.0 bandwidth and thus transmission rates of up to 5 Gbit/s. On the other hand, the hub is connected via USB 3.0 to a PC or laptop.

Good to know

The Ampere indicator is the special extra of this hub. It shows the charging speed of any device connected to USB port 1.

TECHNICAL SPECIFICATIONS

Technical Data

Model	IB-Hub1404
Article No.	60124
EAN Code	4250078164753
Brand	ICY BOX
Category	Hub
Material	Plastic
Color	Black
Transfer rate	Up to 5 Gbit/s
HotSwap	Yes
Power connector	Power adapter 100-240V to 5 V, 4A
Operating system	Windows; MAC OS; Linux
Plug & Play	Yes
Input	Integrated USB 3.0 cable
Output	2x USB 3.0 Type-A, 1x USB 3.0 Type-C™, SD/MicroSD card reader
SD Card type	SD/MicroSD

Logistical Data

Packing unit	40 pcs/carton
Total weight	15,3 kg
Gross weight (incl. packing)	0.358 kg
Net weight	0.110 kg
Dimension/carton	535x370x430 mm
Dimension of packing box	200x85x100 mm
Dimension of article	65x57x57 mm
Country of origin	China

DOCUMENTS

Data Sheet

IB-Hub1404

DOWNLOAD

Manual

IB-Hub1404

DOWNLOAD

FAQ

Are special drivers required?

No, only the standard USB drivers are required, which are already pre-installed on your system. Please make sure that the USB drivers are up to date.

Is Plug & Play supported?

Yes, Plug & Play is supported.

What is the cable length?

In most cases, you will find this information in our datasheet. You can view and download the datasheet on the product page under "Download/FAQ/Support" - "Download Center".

Which memory cards are supported?

You can find this information for each product in our datasheet (also for download). You can view and download the datasheet on the product page under "Download/FAQ/Support" - "Download".

What is Multi-LUN?

The term Multi-LUN stands for the function of being able to read several memory cards at a time. For example, SD and microSD cards can be read and written to at the same time in a card reader. If the card reader is not Multi-LUN capable, only one memory card can be used at a time. In addition, all other memory cards must be removed from the card reader.

The hub/card reader is without function after sleep mode!

Windows® may have automatically turned off the USB root hub to save power. To prevent this from happening, use the following steps to change the USB root hub settings to keep it powered on during sleep mode.
Windows 8/8.1 and 10
• Go to the Windows® settings and select "System" - "Network operation and energy-saving". Then select the "additional power settings".
• Click the power plan settings you want to change.
• Click "Change advanced power settings.
• Click the plus sign (+) next to "USB settings" and "Selective USB Power Saving Setting" to expand the options and change the setting to "Disabled".
• Click OK to apply the setting.
Note: After applying these settings, you may need to disconnect and reconnect your USB device to reconnect.

Languages