with USB Type-A interface and ON/OFF switch for each port
1x USB 3.0 host - up to 5 Gbit/s
4x USB 3.0 Type-A - support BC 1.2 specifications up to 5 V / 2.4 A
LED for power and access
If all USB 3.0 ports are occupied, but you need the data from the USB stick urgently, this candidate could be very helpful. A USB 3.0 port on your computer is expanded into four additional USB ports and they can be placed in more accessible locations, like your desk. Furthermore, all USB ports comply with the battery charging specification (BC 1.2) to quickly recharge mobile devices.
All ports can be switched on and off individually during operation without interrupting the function of the other ports. As a result, a considerable amount of electricity can be saved in the long term.
Due to the use of aluminum as a light, good-looking material, the IB-HUB1405 is always nice to look at and at the same time robust enough, if something goes rough.
|Transfer rate||Up to 5 Gbit/s|
|Power connector||100 - 240 V to 5 V / 4 A|
|Operating system||Windows 7 / 8 / 10; macOS; Linux|
|Output maximal||5 V / 4 A|
|Output||4x USB 3.0 Type-A, all ports support BC 1.2 charging specifications up to 5 V / 2.4 A|
|Input||1x USB 3.0 Type-B to Type-A host|
|Packing unit||30 pcs./carton|
|Total weight||14.0 kg/carton|
|Gross weight (incl. packing)||0,433 kg|
|Net weight||0,236 kg|
|Dimension of packing box||72x380x340 mma|
|Dimension of article||60x115x23 mm|
|Country of origin||China|
Are special drivers required?
Is Plug & Play supported?
What is the cable length?
Which memory cards are supported?
What is Multi-LUN?
The hub/card reader is without function after sleep mode!
Windows 8/8.1 and 10
• Go to the Windows® settings and select "System" - "Network operation and energy-saving". Then select the "additional power settings".
• Click the power plan settings you want to change.
• Click "Change advanced power settings.
• Click the plus sign (+) next to "USB settings" and "Selective USB Power Saving Setting" to expand the options and change the setting to "Disabled".
• Click OK to apply the setting.
Note: After applying these settings, you may need to disconnect and reconnect your USB device to reconnect.