with USB Type-A interface and 1x charging port
7x USB 3.0 hub
including 1x USB charge port, 5 V / 2.1 A
LED for power
Plug & Play and Hot Swap
Seven times powerful
When all the USB 3.0 ports on the PC are already used and the need arises to connect an additional device urgently, this candidate could be perfect assistance. One USB 3.0 port on the PC must be made free, but for that, seven ports are at your disposal in greater ease of use as before on the PC.
They are not all the same
One USB 3.0 port is a bit different than the others. Number 7 is the so-called "Charging port", with it, charging a mobile device or a rechargeable battery with 5V / 2.4A is made fast and efficient since the normal USB 3.0 ports provide only 0.9 Amper.
A robust companion
The IB-AC618 does not tremble so fast. The high-quality aluminum dissipates the inner heat to the outside of the device and provides a perfect passive cooling. Additionally, the material is light and is hard to scratch, which makes it a perfect companion for transport as well as stationary.
|Category||USB 3.0 Hub|
|SD card capacity||No|
|External data interface||7x USB 3.0 Type A|
|Transfer rate||Up to 5 Gbit/s|
|Power connector||100-240 V to 12 V / 3 A|
|Operating system||No limit|
|Plug & Play||yes|
|Input||1x USB 3.0 Type-B|
|Memory card support||No|
|Packing unit||15 pcs./carton|
|Total weight||8.5 kg/carton|
|Gross weight (incl. packing)||0.507 kg|
|Net weight||0.122 kg|
|Dimension of packing box||100x80x200 mm|
|Dimension of article||113x46x26 mm|
|Country of origin||China|
Are special drivers required?
Is Plug & Play supported?
What is the cable length?
Which memory cards are supported?
What is Multi-LUN?
The hub/card reader is without function after sleep mode!
Windows 8/8.1 and 10
• Go to the Windows® settings and select "System" - "Network operation and energy-saving". Then select the "additional power settings".
• Click the power plan settings you want to change.
• Click "Change advanced power settings.
• Click the plus sign (+) next to "USB settings" and "Selective USB Power Saving Setting" to expand the options and change the setting to "Disabled".
• Click OK to apply the setting.
Note: After applying these settings, you may need to disconnect and reconnect your USB device to reconnect.